Watts indicates the consumption of electricity. For easier comparison, refer to "depression" and " flow rate".

Measures the mechanical weight onto a square metre. It is either expressed in Pascal, in millimetres (in a water column), or in millibars.

It is a zone where a vacuum is created and it expresses the real force of suction.

1 mbar = 10 mm h2o = 100 pascals

Volume of air expressed in litres/second or in cubic metres/hour. It is in fact, the measurement of air movement.

220 V motors: up to 3 hours constant use , 6 hours intermittent use.
380 V motors: 24H/24H

Stainless steel tanks are recommended for vacuuming all greasy or messy products (tanks easy to clean).
Consider using polypropylene tanks for vacuuming all acid products.

Our vacuum cleaners are supplied with filters which protect the motors. With very fine dust, these filters may clog up. We delay this clogging effect by supplying the vacuum cleaner with a nylon over filter or a paper bag.

In the case of very fine dust, consider the model 429M which has a third unclogging motor or even one of our cyclone tanks. (ask us for further details).

Our filters : Cotton and polyester filters from 1 to 3 microns.
Nylon filters from 0.6 to 0.8 microns.
The HEPA 'absolute' filters at 0.2 microns.(ask us for details).

Over 200m2 consider our fixed suckers which are fixed in front of all trolley-mounted vacuums. (It is pushed while vacuuming like a lawnmower).

For important or heavy volumes , consider our easy to empty rocking tanks.

If you have a lot of liquid to suck up consider our back draught vacuum 429 CPLB SUB.

FOR ANY SPECIAL APPLICATIONS, CONTACT US.

Only a part of our range has been selected for this website and we certainly have a model which suits your needs (for example: hospitals, nuclear power stations, vacuum cleaners for acids, blowing heads...).